Installation Guide For Stainless Steel Lap Joint Flanges And Stub Ends

Nov 20, 2026 Leave a message

Lap-joint flanges are commonly used in stainless steel piping systems, particularly in applications that require flexible alignment and ease of maintenance.

These flanges are designed for use with a stub end; the flange can rotate freely around the stub end, which simplifies the alignment of bolt holes.

Proper installation of both components is essential for connection stability and sealing performance.

stainless steel flange

 

1. Check Component Compatibility

Before installation, confirm that the Lap Joint Flange and Stub End have matching nominal sizes, dimensional standards and pressure ratings.

The Stub End must be compatible with the selected pipe dimensions.

2. Install the Flange Before Welding

Slide the Lap Joint Flange onto the pipe before welding the Stub End.

Pay attention to its orientation to ensure the flange can rotate freely after assembly.

3. Ensure Proper Welding Alignment

Align the Stub End with the pipe before butt welding.

Maintain proper concentricity and welding quality to avoid distortion that could affect flange alignment or sealing.

4. Inspect the Sealing Surface

The Stub End provides the gasket seating surface.

Keep this area clean and free from scratches, dents, welding spatter and other defects that may compromise sealing.

5. Position the Gasket Correctly

Place a compatible gasket between the Stub End and the mating flange.

Ensure it is properly centered and does not obstruct the internal flow passage.

 

6. Tighten Bolts Evenly

Tighten the flange bolts gradually in a cross-pattern.

Uniform tightening helps distribute gasket compression and reduces the risk of uneven loading.

 

7. Perform a Final Inspection

After assembly, check flange alignment, bolt tightness and gasket positioning.

Conduct an appropriate pressure or leak test before putting the piping system into operation.

11141

Why Proper Installation Is Crucial

Proper installation helps prevent leaks, reduces unnecessary stress at connection points, and simplifies future maintenance. Furthermore, it extends the service life of stainless steel piping components.

JIANEN offers stainless steel lap joint flanges and stub ends in SS304 and SS316L grades. Our products are available in a wide range of sizes and standards, suitable for both sanitary and industrial piping systems-including high-purity fluid systems and liquid cooling systems for AI data centers.

JIANEN - Stainless Steel Flanges, Pipe Fittings, and Fluid Connection Solutions.

 

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry