The extractor is designed to last for many years and this will be achieved if the unit is well maintained. Clean the extractor before and after each use. Use a dry cloth to wipe it after cleaning and always protect the bearings and gearbox from coming into contact with water.
The gearbox shaft or gearbox does not require additional lubrication. Therefore, do not oil or grease these components of the honey extractor.
As for extractor bearings, those with a capacity of 8 frames and above are normally sealed and therefore need no maintenance. Of course, this depends on the manufacturer and in case you suspect they are not working as usual, never hesitate in contacting your manufacturer.
Smaller extractors, that is, those between 2 and 4 frames, generally do not require maintenance on the bearings. However, in case of problems contact the manufacturer.
Always ensure the honey gate is kept in excellent condition. Clean it thoroughly after every use and make the necessary to the pivot screw so that the valve moves as required and seals properly when fully closed. Remember also that the honey gate does not require lubrication. However, if desired use a food-safe lubricant.
Proper cleaning and maintenance of the honey extractor will guarantee long-lasting service. It also helps ensure the honey extracted is free from dirt and contamination.